Enlarge

Look Keo 2 Max Pedals

This has been achieved through the use of a carbon injection process (carbon model) allowing for weight reduction and improved durability.
Particular attention was focused on reliability and provided through features such as: a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last. The new line of Keo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the centre of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Dual seals help to increase bearing longevity.
The Pedal that gave Contador "a maximum of power for his victory in Paris"